JeffCNC Service Center

* POST CUSTOMIZE AND DATA SUPPLY *

CNC INFO CENTER

Good MasterCAM Postprocessor

Posted by JEFFCNC on January 3, 2020 at 4:40 PM Comments comments (0)

Good MasterCAM Postprocessor


Recently, JEFF CNC developing good MasterCAM POST for customer, you can use different WCS offset and different sub program whatever you want.


1. If you don’t use Lock on First WCS, you will get G54, G55…



.
2. If you use Lock on First WCS, you will get G54 only.


.


3. And you can set Subs Progs [0=Off, Value=Num subs] as 1, then you can separate main program and sub program.
 

.


4. If you set Subs Progs [0=Off, Value=Num subs] more than 1, you will get more sub program with “/” block.


Use this special postprocessor, you can do anything whatever you want. You can “/” block set up first part and then run more part on same time.

.
JeffCNC alway do good job, want everybody happy, save time and save money.

Please see detail info about POST high value MachineSIM:

https://jeffcnc.webs.com/apps/blog/show/46966022-about-gibbscam-post-and-machinesim

.

If you have any question or need any help about POST, ToolList, Machine Simulation and Machine Simulation macros, please contact me: [email protected]

About POST and ToolList

Posted by JEFFCNC on July 26, 2019 at 5:40 PM Comments comments (18)

About POST and ToolList


MasterCAM have GENERIC FUNC 4X MILL.PST POST, use this POST you will get ToolList in your NC program.

But, different company like different format of NC program.One of my customer like the toollist include all tool info with sequence number.



.
Whatever you change sequence number, always match on ToolList:

.

JeffCNC can do whatever you want and whatever you use.

Here is picture of GibbsCAM ToolList:

.

Whatever you change sequence number, always match on ToolList:



JeffCNC can customize good Postprocessor, MachineSIM,  ToolList, and whatever you want.

JeffCNC alway do good job, want everybody happy, save time and save money.

Please see detail info about POST high value MachineSIM:

https://jeffcnc.webs.com/apps/blog/show/46966022-about-gibbscam-post-and-machinesim

.

If you have any question or need any help about POST, ToolList, Machine Simulation and Machine Simulation macros, please contact me: [email protected]

Customized Good POST and MachineSim!

Posted by JEFFCNC on March 3, 2019 at 2:25 PM Comments comments (1)

JeffCNC Customized Good POST and MachineSim


Recently, JEFFCNC customized good GibbsCAM POST, MDD for customer, machine rotary special but JeffCNC can do whatever customer want, please see email:





And JEFFCNC customized good MachineSim, is good for programming. Here is info about how to use GibbsCAM MachineSim:


1.Use GibbsCAM Plug_Ins > PathFinder find MachineSim folder.



2. Copy MachineSim package to MachineSim folder.



3. Use and load your MachinmeSim.
 


4. Here is info for old version:


5. Here is sample for load MachineSim:


Use MachinmeSim you can find any problem and improve programming.

JeffCNC alway do good POST and MachineSim, is good for you save time and save money.

Please see detail info about POST high value MachineSIM:

https://jeffcnc.webs.com/apps/blog/show/46966022-about-gibbscam-post-and-machinesim

If you have any question or need any help about POST, ToolList, Machine Simulation and Machine Simulation macros, please contact me: [email protected]


And JeffCNC customize special POST for customer who use very old mori seiki machine with yasnac control, X axis reversed direction (X-,Z+) and G2 becomes G3, G42 becomes G41).

JeffCNC can do exactly whatever customer want, please see detail info:

 

And JeffCNC customize more special POST for customer, after quote and finish good POST less than 1 week.

Here is email from customer today and customer said:

"Post looking pretty good thank you. Will keep on testing."

JeffCNC customize new POST over 10 years never have problem. I just want do good POST for customer but I hope have good cooperation and don't want waste your money and my time.

You can see I have so many good customers and good cooperation and customized good POST.

Here is email from customer:

.

Here is more email from customer:

.

 

JeffCNC can do whatever customer want:

.

JeffCNC always customized good POST for customer:

Such as good POST for Hass and Okuma, all customer like it.

Here is email from customer and said everything I've tried works perfectly:

.

Here is one email from customer:

.

And some special good POST for customer:

Such as 5 Axis Matsuura MAM72-100H horizontal post and Mdd with special gun drill macros. Post uses G68.2 and shower coolant options with G131R0 thru G131R9 for countering control.

Here is email from customer:

.

And some POST for special control such as Siemens 840D:

POST for Quaser MF500U 5axes with Siemens 840D control.

Here is email from customer:

.

More comments by email:

.

.

More Special POST For MasterCAM:

One POST for trumpf laser with semins 840 controller. Main problem is

the TC_LASER_ON cycle is called up in the NC program with the following cycle parameters:

TC_LASER_ON (Laser method, "Laser technology table", Piercing type, Cutting type)    

 

 

 

JeffCNC design Laser technology table use Tool name;

 

If you use default Tool # and same number for Len. Offset and Dia. Offset,  Laser method will use "9", Piercing type use "10" and Cutting type use "110" as default, or you can change whatever you want:

 

JeffCNC always do the best for everybody that's why customer happy for this POST:

 

Another POST for Siemens MILL, JeffCNC customize good ToolLIST :

MasterCAM ToolLIST can align:

 

You can set Tool name length 20 or any number, if your Tool name longer then this number, will automatically put "~" keep same length:

.

JeffCNC can customize good POST whatever you want, if you want customize new POST, please contact me: [email protected].

How to setup MasterCAM POST

Posted by JEFFCNC on November 16, 2018 at 6:45 PM Comments comments (0)

How to setup MasterCAM POST


Example: SIEMENS 810D MX4 POST FOR MASTERCAM X4

Step0: Copy POST (pst and psb if you have) to MasterCAM POST folder: mcamx\mill\posts

 

Step1: Settings _ Control Definition Manager...

 

Step2: Open PostProcessors

 

Step3: Add Files

 

Step4: Select your new POST: Siemens 810D MX4.pst and Open

 

Step5: Select your new POST: Siemens 810D MX4.pst and save

 

Step6: Settings _ Machine Definition Manager...

 

Step7: Select your new POST: Siemens 810D MX4.pst

 

Step8: Save your setup, and OK,OK,OK Finished

 

Any question please contact JeffCNC: [email protected]

 

How to setup MasterCAM MMD and Control

Posted by JEFFCNC on November 16, 2018 at 6:40 PM Comments comments (0)

How to setup MasterCAM MMD and Control


1,  Copy New MMD and Control files to your CNC_MACHINES folder:


 

 2,  Open your Toolpaths --> Files --> Replace folder:

 

3,  Select the new MMD which you copy to CNC_MACHINES folder then Open:

 

4, You can see old MMD replaced by new MMD --> OK:

 

.

JeffCNC can customize good POST, MMD and Control whatever you want, good for you test and improve your program.

If you want customize new POST and Machine Simulation, please contact me: [email protected].

Customized Good Machine Simulation!

Posted by JEFFCNC on November 6, 2018 at 8:10 PM Comments comments (0)

Customized Good Machine Simulation


JeffCNC customized good Machine Simulation for customer, everybody like it.

For example, JeffCNC customized all kinds of Haas Machine Simulation for GibbsCAM, MasterCAM and EdgeCAM.

 

1,  Here is GibbsCAM 4Axis Machine Simulation:
 

 

 2,  Here is GibbsCAM 5Axis Machine Simulation:

More info please see: Customize GibbsCAM MDD and Simulation

 

3,  Here is EdgeCAM 5Axis Machine Simulation:

 

4, You can see movement of EdgeCAM Machine Simulation:

 

 

5,  Here is MasterCAM 4Axis Machine Simulation:

 

6. You can see movement of MasterCAM Machine Simulation:

.

JeffCNC can customize good POST and Machine Simulation whatever you want, good for you test and improve your program.

If you want customize new POST and Machine Simulation, please contact me: [email protected].

Customized Good MasterCAM POST!

Posted by JEFFCNC on April 18, 2018 at 9:00 PM Comments comments (0)

Customized Good MasterCAM POST


Recently, JeffCNC customized good POST for MasterCAM:

 

One POST for trumpf laser with semins 840 controller. Main problem is

the TC_LASER_ON cycle is called up in the NC program with the following cycle parameters:

 

TC_LASER_ON (Laser method, "Laser technology table", Piercing type, Cutting type)    

 

 

 

JeffCNC design Laser technology table use Tool name;

 

If you use default Tool # and same number for Len. Offset and Dia. Offset,  Laser method will use "9", Piercing type use "10" and Cutting type use "110" as default, or you can change whatever you want:

 

JeffCNC always do the best for everybody that's why customer happy for this POST:

 

Another POST for Siemens MILL, JeffCNC customize good ToolLIST :

MasterCAM ToolLIST can align:

 

You can set Tool name length 20 or any number, if your Tool name longer then this number, will automatically put "~" keep same length:

.

JeffCNC can customize good POST whatever you want, if you want customize new POST, please contact me: [email protected].

Good POST for Customer!

Posted by JEFFCNC on April 11, 2018 at 6:40 PM Comments comments (0)

Good POST for Customer!

 

Recently, JeffCNC customized good POST for threading:

Here is email from customer:

.

JeffCNC can do whatever customer want:

.

And JeffCNC customized good Machine Simulation for customer, JeffCNC can do whatever you want. Here is email from one customer:

________________________

Jeff.

Thanks! 

All of the Mastercam and Surfcam guys at my shop are now envious !

Bamm ! you made my Haas dual trunnion sim, Matsuura  72-100 H sim , and now UMC 750 simultaneous sim.

thanks!

________________________

 

Here is more info about GibbsCAM POST and MachineSIM

https://jeffcnc.webs.com/apps/blog/categories/show/845457-gibbscam

 

JeffCNC customer from all over the world, here is one email recently from USA:

________________________

WOW Jeff !

Bamm that is just what I wanted.
G-code looks right I am at home and will run more tests but over all looks Great.
thanks

________________________


Recently, JeffCNC customized good POST for customer, here is email from Dan:

________________________

Jeff,


Thank you for doing the job that you advertise to do.

Some other people on c.n.c. web sites claim to do but do not deliver.

The post you made for me works perfect.!


On Wednesday, April 4, 2018 6:14 PM , DAN...

________________________


Here is Picture from Dan email:

More comments by email:

 

 

 

 

 


More customer comments:

 

 

 

 

JeffCNC can customize good POST whatever you want, if you want customize new POST, please contact me: [email protected].

Smart POST for MasterCAM

Posted by JEFFCNC on January 2, 2018 at 6:20 PM Comments comments (1)

Smart POST for MasterCAM

JeffCNC customize smart POST for MasterCAM can avoid some mistake.

* Check Compensation.

* Check same tool number.

* Check feed and speed.

* Check rough and finish.

* Check chamfer tool.

* Check clearance.

* Check work offset.

* Check DEFINE TOOL NAME


For example:

1, Check Compensation:

Normally we need compensation for finish.

If you use wrong compensation or forget compensation will give alarm:



2, Use MasterCAM programming, is very easy made mistake use same tool number with different diameter or tool type.

If you use same tool number with different diameter or tool type will give alarm:



Please see more info

3,JeffCNC customize smart POST for MasterCAM can avoid some mistake.

.

4,POST can show you if your clearance less than 2.0 inch:

.

5,POST can show you if you have wrong feed/speed:

.

6,POST will remind you if you use different WCS:

.

7,Then you can check and change your clearance:

.

8,And you can update your feed/speed:

.

9,You can double check your WCS:

.

After update and POST again, no any alarm and avoid mistake.

.

JeffCNC can customize good POST whatever you want, if you want customize new POST, please contact me: [email protected].

How to Test New POST

Posted by JEFFCNC on October 11, 2017 at 7:05 PM Comments comments (0)

How to Test New POST

Recently, JeffCNC customize new POST and show customer how to test codes.

1,Creat same toolpath on Top plan (B0) and Side Plan (B-90)

.

2,Use Abs and compensation off easy for compare:

.

3,New POST special can input toolhigh, put 0 as normal:

.

4,After POST you can see NC codes match two different plan:

.

5,Machine is JCT1325L 5 Axis:

 

JeffCNC customize so many new POST so many years, always do my best to customer.

.

If you have same machine or any idea please leave message or contact me: [email protected].

How to Get MasterCAM Tool List?

Posted by JEFFCNC on September 26, 2017 at 6:05 PM Comments comments (0)


How To Get MasterCAM Tool List?

JeffCNC customized good MasterCAM ToolList, is very easy:

1. Select Operation, right click and select "Setup sheet":

 

 

2. Input header INFO? (Yes for first time):

 


 

3. Enter Part Number:
 

 


4. Enter Part Name:

 


 

5. Enter Operation INFO:




6. Enter Programmer Name:



7. After all header INFO then you will get ToolList by Word automatically:

 


8. You can preview your ToolList:

 


9. You don't need change anything just print out: 



How To Setup MasterCAM Tool List?

Copy ToolList Software to MasterCAM POST folder and then setup:

1. Setting => Configuration...:

 

 

2. Toolpathe => Setup Sheet program =>  Select ".SET File":

 


 

3. Setting => Machine Definition Manager...:
 

 


4. Click Control Definition Manager...:

 


 

5. Files=>Mill=>Select file name: ToolList.SET => Click Yes


 

6. Click Yes Save all change:



.

If you want buy MasterCAM ToolList or others source codes on JeffCNC Web Store, please contact me: [email protected].

Do you know your POST version?

Posted by JEFFCNC on December 6, 2016 at 12:50 PM Comments comments (0)

If you customized any POST from JeffCNC, you can use 8888 as program number and then you will see your POST version.

______________________________________________

Example of GibbsCAM:


 





______________________________________________

Example of MasterCAM:






______________________________________________

Example of EdgeCAM:


 

JEFFCNC looking for excellent postprocessor reference!

 

Here is comment by customer:

http://jeffcnc.webs.com/apps/forums/topics/show/13165013-haas-vertical-3-axis-post


If you interest above please email : [email protected], thanks!!!
 

 

Compare GibbsCAM, EdgeCAM, MasterCAM and PowerMILL

Posted by JEFFCNC on December 9, 2012 at 1:20 PM Comments comments (8)

Compare GibbsCAM, EdgeCAM, MasterCAM and PowerMILL

JeffCNC

About training or self-learning

Most people say without a doubt GibbsCAM is far easier to learn, everything is graphical i.e. drag and drop. You can self-learning GibbsCAM if you download some training materials or videos from JeffCNC. Others CAM normally need professional training.

 

About intelligent programming

EdgeCAM is the only CAM system of intelligent programming. EdgeCAM can create toolpath easy based your solids feature and updated everything automatically if your model changed.

 

About 2D and 3D modeling

GibbsCAM is the best for 2D and 3D modeling. You can delete 2D geometry after create model and you can modify solid by many easy way. MasterCAM model should be problem if you delete 2D geometry; EdgeCAM and PowerMill should use other software for 3D modeling.

 

About machine and simulation

EdgeCAM is the best about 3D machine and simulation. By EdgeCAM simulation, you can show different machine parts and show where over cut or leave materials. EdgeCAM postprocessor include 3D machine model and setup everything already, you don’t need do anything just POST out your program. Others CAM need separate MDD and machinesim.

 

About macros and re-exportation

You can use GibbsCAM macros or EdgeCAM PCI macros for improve programming. JeffCNC create EdgeCAM PCI package for create VISE, TXT, DIM any point, X0Y0 and Z0 dimension. Use JeffCNC GibbsCAM macros, it's easy for customize various kinds Tool List; Show Tools information and G/M codes information; Especially, it's very easy for select Taps, Reamers and Drills, Drill always match Tap or Reamer.

 

About CAM version

GibbsCAM can save new CAM file for old version and GibbsCAM postprocessor good for different CAM version. Normally update CAM version good for user and progressive. But MasterCAM change postprocessor and CAM version frequently no good for different user exchange and cooperation.

 

About postprocessor

GibbsCAM has the most powerful Compost3 for customize good postprocessor whatever you want, especially the POST compiler as exe file, very fast and wonderful. JeffCNC customized good posts for customer. You don’t need change anything after Post, save time save money.

 

About CAM Poll

All CAM system are similar idea with strengths and weaknesses, but only GibbsCAM is very easy to learn and do good job, especially GibbsCAM can customize good POST, remember Good Post, Good Program;Save time save money. So for my opinion GibbsCAM is the best.

 

EdgeCAM is the only intelligent CAM system, easy create toolpath and updated everything automatically based solids feature. And EdgeCAM has good 3D machine simulation. So for my opinion EdgeCAM is the second one.

 

MasterCAM is the most popular CAM system and improved so many from dos system but still have many problems, especially MasterCAM change version frequently but no compatibility. So for my opinion MasterCAM is the third one.

 

PowerMILL is the professional system for Mould programming, same as CATIA and others special CAM system, different with normally turning and milling programming. So for my opinion PowerMILL is the fourth one for special only.

 

Thanks for you visiting JeffCNC website, you can poll your favourite CAM system on JeffCNC website. If you have any different opinion or require any assistance, please feel free to contact JeffCNC: [email protected]

 

Customize MasterCAM Tool List

Posted by JEFF on January 22, 2011 at 7:00 PM Comments comments (54)

Customize MasterCAM Tool List

.

JEFF CNC developing some GibbsCAM macros for CNC programming. Use GibbsCAM macros, it's easy for customize various kinds Tool List; Show Tools information. But MasterCAM can't customize good Tool List, even we use X+ chooks, we can't get everything what we want.

.

JEFFCNC have good idea for customize MasterCAM Tool List. You know we can customize MasterCAM Post, and all tools information should be in MasterCAM POST, why not customize Tool List by MasterCAM POST?

.

So, JEFFCNC developed special MasterCAM POST with Tool List. When you Post your program, you have a selection for POST Tool List or NC Program.

.

.

If you choice POST Tool List, MasterCAM POST will only Post out Tool List for you.

.

That's a TXT file, you can open it by Excel or just copy to Excel and can transfer any format for print by Excel Macros automatically, it's very easy.

.

Transfer any format for print by Excel Macros automatically.

.

If you only want Post out NC program, just keep going, samething as you post NC program before. MasterCAM can customize good program same as GibbsCAM, seperate Main program and subprogram, sub program number always matching tool number (Post can remember tools used before). You don’t need change anything after Post:

.

You can post out your Tool List and NC Program same time whatever you want. If you have any question please contact me: [email protected]

.

If you want test MasterCAM Special POST with Tool List: ToolList3aX4.rar, ToolList3aX5.rar

please Sign in and download in MasterCAM Download Center.


GibbsCAM POST

JeffCNC customized wonderful GibbsCAM 3~5Ax PostProcessor for FANUC series, Mitsubishi, Toshiba, Matsuura, SNK, OKK, Kitamura, and Hardinge, Yasnac control Mill, Lathe and millturn machine. Programmer satisfied 100% for the program, they don't need change anything.

In addition, JeffCNC developed special POST for Mach3/4, MAZAK, OKUMA and HAAS. We guarantee you have good POST and good service. Such as one client's email: "I have to show and discuss with my boss and explain what's you change. For me everything is very good. You are genius !!!!!!!!!!!!!!!!! "

OTHER POSTS

JeffCNC developed other POST for Other CAM with subroutines for multiple parts. POST can do whatever you want, save time and save money!

JeffCNC customized good POST such as Mach3, Mazak, Haas VF3, VF4, MiniMill and Lathe. JeffCNC guarantee 100% for good POST and free update service !!!!!!!!!!!!!!!!

Recent Videos

3105 views - 0 comments
3062 views - 0 comments
3072 views - 0 comments
3097 views - 0 comments

Customized POST

Calendar & Time

JEFFCNC