JeffCNC Service Center

* POST CUSTOMIZE AND DATA SUPPLY *

CNC INFO CENTER

How to use GibbsCAM MachineSim?

Posted by JEFFCNC on May 1, 2021 at 11:40 AM Comments comments (0)

How to use GibbsCAM MachineSim?


Recently, JEFFCNC customized good GibbsCAM POST, MDD for customer, machine rotary special but JeffCNC can do whatever customer want, please see email:





And JEFFCNC customized good MachineSim, is good for programming. Here is info about how to use GibbsCAM MachineSim:


1.Use GibbsCAM Plug_Ins > PathFinder find MachineSim folder.



2. Copy MachineSim package to MachineSim folder.



3. Use and load your MachinmeSim.
 


4. Here is info for old version:


5. Here is sample for load MachineSim:


Use MachinmeSim you can find any problem and improve programming.

JeffCNC alway do good POST and MachineSim, is good for you save time and save money.

Please see detail info about POST high value MachineSIM:

https://jeffcnc.webs.com/apps/blog/show/46966022-about-gibbscam-post-and-machinesim

If you have any question or need any help about POST, ToolList, Machine Simulation and Machine Simulation macros, please contact me: [email protected]

Good MasterCAM Postprocessor

Posted by JEFFCNC on January 3, 2020 at 4:40 PM Comments comments (0)

Good MasterCAM Postprocessor


Recently, JEFF CNC developing good MasterCAM POST for customer, you can use different WCS offset and different sub program whatever you want.


1. If you don’t use Lock on First WCS, you will get G54, G55…



.
2. If you use Lock on First WCS, you will get G54 only.


.


3. And you can set Subs Progs [0=Off, Value=Num subs] as 1, then you can separate main program and sub program.
 

.


4. If you set Subs Progs [0=Off, Value=Num subs] more than 1, you will get more sub program with “/” block.


Use this special postprocessor, you can do anything whatever you want. You can “/” block set up first part and then run more part on same time.

.
JeffCNC alway do good job, want everybody happy, save time and save money.

Please see detail info about POST high value MachineSIM:

https://jeffcnc.webs.com/apps/blog/show/46966022-about-gibbscam-post-and-machinesim

.

If you have any question or need any help about POST, ToolList, Machine Simulation and Machine Simulation macros, please contact me: [email protected]

About POST and ToolList

Posted by JEFFCNC on July 26, 2019 at 5:40 PM Comments comments (18)

About POST and ToolList


MasterCAM have GENERIC FUNC 4X MILL.PST POST, use this POST you will get ToolList in your NC program.

But, different company like different format of NC program.One of my customer like the toollist include all tool info with sequence number.



.
Whatever you change sequence number, always match on ToolList:

.

JeffCNC can do whatever you want and whatever you use.

Here is picture of GibbsCAM ToolList:

.

Whatever you change sequence number, always match on ToolList:



JeffCNC can customize good Postprocessor, MachineSIM,  ToolList, and whatever you want.

JeffCNC alway do good job, want everybody happy, save time and save money.

Please see detail info about POST high value MachineSIM:

https://jeffcnc.webs.com/apps/blog/show/46966022-about-gibbscam-post-and-machinesim

.

If you have any question or need any help about POST, ToolList, Machine Simulation and Machine Simulation macros, please contact me: [email protected]

About GibbsCAM POST and MachineSIM

Posted by JEFFCNC on July 17, 2019 at 5:25 PM Comments comments (0)

About GibbsCAM POST and MachineSIM


 About GibbsCAM POST :

GibbsCAM old version use .pst Postprocessor, new version use .post, totally different and .post can't use for old version.

Normally JeffCNC customize .pst Postprocessor because .post more expensive. JeffCNC want customer save money so price for .pst only, and .pst still can use for new version.

When .pst use for new version, GibbsCAM will give you a notice, you can cancel the notice if you don't like it.

JeffCNC can update .pst to .post for new version but should quote first and charge more money because will take time update and do more test.


About GibbsCAM MachineSIM:

JeffCNC can customize good MachineSIM depend on 3 price levels, please quote:
1, don't have machine model
2, have machine model
3, need macros for door movement and frame auto transparency

Normally JeffCNC customize MachineSIM without macros because save time and customer can save money.

But level 3 MachineSIM will be high value and beautiful, please see detail info:

Recently, JeffCNC made high value Haas VF2 5 axis MachineSIM for machine simulation:



When you select MachineSIM, you will see door open automatically as a movie:



When you start MachineSIM, door will closed and machine frame will change transparency.



Now, you don't need change machine parts setup, you see inside very clearly.



And so on…

 

When finish, if you want Rewind, you will see door open again automatically as a movie:


Here is machine simulation videos, very interesting.


.

If you have any question or need any help about GibbsCAM pst/post, MDD, Machine Simulation and Machine Simulation macros, please contact me: [email protected]

What's difference with AC or AB 5 axis programming?

Posted by JEFFCNC on July 2, 2019 at 5:30 PM Comments comments (0)

What's difference with AC or AB 5 axis programming?

 

Recently, JeffCNC customize good AC 5 axis POST for customer, and then he need customize new AB 5 axis POST, but he test with same CAM file always have problem.

For Gibbs 5 axis programming, XY plan should exactly mach your machine, so programming for AC and AB 5 axis machine will be different.

For example, for AC 5 axis machine XY plan maybe like this:



But, for AB 5 axis machine XY plan should be like this:


Here is machine simulation for AB 5 axis machine programming.

A0.B0. position should be like this:



After A axis rotate then do OP1:



And then OP2 do 5 axis simultaneous:

And then do OP3:



And then do OP4:…



Here is machine simulation for AC 5 axis machine programming.
Now, we can see A0.C0. position should be like this:


OP1 in XY plan so don't need rotate:



And then OP2 do 5 axis simultaneous:



And so on…



Here is video for AB 5 axis machine simulation:



Here is video for AC 5 axis machine simulation:


.

If you have any question or need any help about GibbsCAM MDD and Machine Simulation, please contact me: [email protected]

.

If you want test JeffCNC 4Axis and 5Axis Machine Simulation, please Sign in and download in GibbsCAM Download Center.

How to customize machine simulation for dual trunnion?

Posted by JEFFCNC on April 15, 2019 at 6:00 PM Comments comments (0)

How to customize machine simulation for dual trunnion?

 

Recently, JEFF CNC developing good machine simulation for dual trunnion.

You know Haas VF3 SST 5 Axis milling machine have two C-Axis trunnion, but  5 axis programming always use one zero and stock for one job only.

So, I have to made two MachineSim, right MachineSim for right trunnion, left MachineSim for left trunnion.

I think this is the only way for two trunnion machining and simulation, I test both work OK.
.
1, Use regular 5Axis programming :

.

2, Select right MachineSim for right trunnion machining:

.

3, You will see right trunnion machining OK:

.

.

.

4, If you select left MachineSim for left trunnion:

.

5, You will see left trunnion machining OK too:

.

.

.

You don’t need worry about your parts on which trunnion, programming same. You don’t need change anything for Machine Simulation, it's very easy.

.

6, Here is videos for Machine Simulation:

.

If you have any question or need any help about GibbsCAM MDD and Machine Simulation, please contact me: [email protected]

.

If you want test JeffCNC 4Axis and 5Axis Machine Simulation, please Sign in and download in GibbsCAM Download Center.

How to setup MasterCAM POST

Posted by JEFFCNC on November 16, 2018 at 6:45 PM Comments comments (0)

How to setup MasterCAM POST


Example: SIEMENS 810D MX4 POST FOR MASTERCAM X4

Step0: Copy POST (pst and psb if you have) to MasterCAM POST folder: mcamx\mill\posts

 

Step1: Settings _ Control Definition Manager...

 

Step2: Open PostProcessors

 

Step3: Add Files

 

Step4: Select your new POST: Siemens 810D MX4.pst and Open

 

Step5: Select your new POST: Siemens 810D MX4.pst and save

 

Step6: Settings _ Machine Definition Manager...

 

Step7: Select your new POST: Siemens 810D MX4.pst

 

Step8: Save your setup, and OK,OK,OK Finished

 

Any question please contact JeffCNC: [email protected]

 

How to setup MasterCAM MMD and Control

Posted by JEFFCNC on November 16, 2018 at 6:40 PM Comments comments (0)

How to setup MasterCAM MMD and Control


1,  Copy New MMD and Control files to your CNC_MACHINES folder:


 

 2,  Open your Toolpaths --> Files --> Replace folder:

 

3,  Select the new MMD which you copy to CNC_MACHINES folder then Open:

 

4, You can see old MMD replaced by new MMD --> OK:

 

.

JeffCNC can customize good POST, MMD and Control whatever you want, good for you test and improve your program.

If you want customize new POST and Machine Simulation, please contact me: [email protected].

Customized Good MasterCAM POST!

Posted by JEFFCNC on April 18, 2018 at 9:00 PM Comments comments (0)

Customized Good MasterCAM POST


Recently, JeffCNC customized good POST for MasterCAM:

 

One POST for trumpf laser with semins 840 controller. Main problem is

the TC_LASER_ON cycle is called up in the NC program with the following cycle parameters:

 

TC_LASER_ON (Laser method, "Laser technology table", Piercing type, Cutting type)    

 

 

 

JeffCNC design Laser technology table use Tool name;

 

If you use default Tool # and same number for Len. Offset and Dia. Offset,  Laser method will use "9", Piercing type use "10" and Cutting type use "110" as default, or you can change whatever you want:

 

JeffCNC always do the best for everybody that's why customer happy for this POST:

 

Another POST for Siemens MILL, JeffCNC customize good ToolLIST :

MasterCAM ToolLIST can align:

 

You can set Tool name length 20 or any number, if your Tool name longer then this number, will automatically put "~" keep same length:

.

JeffCNC can customize good POST whatever you want, if you want customize new POST, please contact me: [email protected].

Good POST for Customer!

Posted by JEFFCNC on April 11, 2018 at 6:40 PM Comments comments (0)

Good POST for Customer!

 

Recently, JeffCNC customized good POST for threading:

Here is email from customer:

.

JeffCNC can do whatever customer want:

.

And JeffCNC customized good Machine Simulation for customer, JeffCNC can do whatever you want. Here is email from one customer:

________________________

Jeff.

Thanks! 

All of the Mastercam and Surfcam guys at my shop are now envious !

Bamm ! you made my Haas dual trunnion sim, Matsuura  72-100 H sim , and now UMC 750 simultaneous sim.

thanks!

________________________

 

Here is more info about GibbsCAM POST and MachineSIM

https://jeffcnc.webs.com/apps/blog/categories/show/845457-gibbscam

 

JeffCNC customer from all over the world, here is one email recently from USA:

________________________

WOW Jeff !

Bamm that is just what I wanted.
G-code looks right I am at home and will run more tests but over all looks Great.
thanks

________________________


Recently, JeffCNC customized good POST for customer, here is email from Dan:

________________________

Jeff,


Thank you for doing the job that you advertise to do.

Some other people on c.n.c. web sites claim to do but do not deliver.

The post you made for me works perfect.!


On Wednesday, April 4, 2018 6:14 PM , DAN...

________________________


Here is Picture from Dan email:

More comments by email:

 

 

 

 

 


More customer comments:

 

 

 

 

JeffCNC can customize good POST whatever you want, if you want customize new POST, please contact me: [email protected].

Smart POST for MasterCAM

Posted by JEFFCNC on January 2, 2018 at 6:20 PM Comments comments (1)

Smart POST for MasterCAM

JeffCNC customize smart POST for MasterCAM can avoid some mistake.

* Check Compensation.

* Check same tool number.

* Check feed and speed.

* Check rough and finish.

* Check chamfer tool.

* Check clearance.

* Check work offset.

* Check DEFINE TOOL NAME


For example:

1, Check Compensation:

Normally we need compensation for finish.

If you use wrong compensation or forget compensation will give alarm:



2, Use MasterCAM programming, is very easy made mistake use same tool number with different diameter or tool type.

If you use same tool number with different diameter or tool type will give alarm:



Please see more info

3,JeffCNC customize smart POST for MasterCAM can avoid some mistake.

.

4,POST can show you if your clearance less than 2.0 inch:

.

5,POST can show you if you have wrong feed/speed:

.

6,POST will remind you if you use different WCS:

.

7,Then you can check and change your clearance:

.

8,And you can update your feed/speed:

.

9,You can double check your WCS:

.

After update and POST again, no any alarm and avoid mistake.

.

JeffCNC can customize good POST whatever you want, if you want customize new POST, please contact me: [email protected].

How to Download?

Posted by JEFFCNC on December 11, 2017 at 7:25 PM Comments comments (1)

Can not Download In JeffCNC?

.

If you already $10 Donation for membership but can not download videos and more materials, please send me email: [email protected]

.

For JeffCNC Registered Members

.

1, Download videos please use menu on the left: CNC Videos Center -> ... Videos Center:


.

2, Download PDF Senior Documents please use menu on the left: Senior Docs Center -> ... Senior Docs:


.

Notice: Maybe have more materials download please see "Top or bottom of download page"

*** More ... Download Here!! ***

.

If download link with baidu.com, please see How to Download In Baidu?

.

How to Download In Baidu?


1, If you download link with baidu.com you need remember password:


.

2, Open the link to baidu and imput password, then OK:

.

3, You can see file size and download it, very easy:

.

4, Open some link to baiduwp special as this:

.

5, Same thing, imput password, OK then download the file directly:


.

Or you can use Google website translation, very easy......

.

Notice: Maybe download big file (>300M) need register Baidu first!!

.

If you have any question please email : [email protected], thanks!!!

 

How to Install EdgeCAM POST?

Posted by JEFFCNC on December 11, 2017 at 7:15 PM Comments comments (0)

How to Install EdgeCAM POST?


1, Just remind maybe have two "Plaint" folder in Documents folder:


.

Copy POST files to your POST folder (Make sure copy to right "Plaint" folder or copy to bouth):


.

3, In "Machining" system select the right POST:

.


4, In "NC Code" system you can generate NC Codes:


 

.


5, Input your program number:

 

.


6, Finally you got your NC program:

 
.

JeffCNC run so many years never have problem. I guarantee you will satisfied 100% for the POST.

.

Here is comment by customer:

http://jeffcnc.webs.com/apps/forums/topics/show/13165013-haas-vertical-3-axis-post


If you want customize new POST please email : [email protected], thanks!!!


How to Test New POST

Posted by JEFFCNC on October 11, 2017 at 7:05 PM Comments comments (0)

How to Test New POST

Recently, JeffCNC customize new POST and show customer how to test codes.

1,Creat same toolpath on Top plan (B0) and Side Plan (B-90)

.

2,Use Abs and compensation off easy for compare:

.

3,New POST special can input toolhigh, put 0 as normal:

.

4,After POST you can see NC codes match two different plan:

.

5,Machine is JCT1325L 5 Axis:

 

JeffCNC customize so many new POST so many years, always do my best to customer.

.

If you have same machine or any idea please leave message or contact me: [email protected].

How To Get GibbsCAM Tool List?

Posted by JEFFCNC on September 27, 2017 at 7:50 PM Comments comments (1)

How to Get GibbsCAM Tool List

GibbsCAM has a macro function that can be used to create ToolList.

.

Recently, JEFF CNC developing some GibbsCAM macros for CNC programming. Use GibbsCAM macro, it's easy for customize various kinds Tool List:

.

GibbsCAM macros menu: Toollist Report

.

For toollist report have 3 function:

1, General toollist report

2, Toollist with cut depth

3, Toollist with cut time

All tool info, cut depth and cut time come from toolpath of your CAM file automatically.(Calculate Min. cut depth (deepest one) and total cut time from all toolpath of same tool)

.

Tool List with cut depth.

.

You can save Tool List and transform to Excel automatically.

 .

If you want buy GibbsCAM Macros Package or others source codes on JeffCNC Web Store, please contact me: [email protected].

How to Get MasterCAM Tool List?

Posted by JEFFCNC on September 26, 2017 at 6:05 PM Comments comments (0)


How To Get MasterCAM Tool List?

JeffCNC customized good MasterCAM ToolList, is very easy:

1. Select Operation, right click and select "Setup sheet":

 

 

2. Input header INFO? (Yes for first time):

 


 

3. Enter Part Number:
 

 


4. Enter Part Name:

 


 

5. Enter Operation INFO:




6. Enter Programmer Name:



7. After all header INFO then you will get ToolList by Word automatically:

 


8. You can preview your ToolList:

 


9. You don't need change anything just print out: 



How To Setup MasterCAM Tool List?

Copy ToolList Software to MasterCAM POST folder and then setup:

1. Setting => Configuration...:

 

 

2. Toolpathe => Setup Sheet program =>  Select ".SET File":

 


 

3. Setting => Machine Definition Manager...:
 

 


4. Click Control Definition Manager...:

 


 

5. Files=>Mill=>Select file name: ToolList.SET => Click Yes


 

6. Click Yes Save all change:



.

If you want buy MasterCAM ToolList or others source codes on JeffCNC Web Store, please contact me: [email protected].

How to transfer part to sub?

Posted by JEFFCNC on January 31, 2017 at 9:25 AM Comments comments (0)

How to transfer part to sub?

GibbsCAM have the function UTILITY to transfer part to sub:

 

For example you have two spindle one turret machine:


For Main spindle programming should be:

 

 

Transfer part to sub with UTILITY:



For Sub spindle programming should be:


JeffCNC made good POST over 10 yrs, if you want customize new POST, please tell me detail machine Axis info.

 

 

 

 

JeffCNC International Investment Cooperation

Posted by JEFFCNC on November 29, 2016 at 11:40 AM Comments comments (0)

JeffCNC International Investment Cooperation

 

1. Mechanical Projects

 

JeffCNC website founded more than 10 years, with abundant experience of GibbsCAM, MasterCAM, EdgeCAM and PowerMILL training, technical support and post-processing development. Customized all kind of Lathe and 3 ~ 5-axis Milling post-processor...

 

Customer from all over the world, satisfied 100% for POST and technical service. ( China, Canada, USA, Denmark, France, Spain, Sweden, Italy, Germany... )

 

JeffCNC has existing website as platform and technical resources, cooperation can be carried out in the following areas:

 

* Mechanical CAD / CAM software technical training and consultation;

* Customize or support in-hand post-processor for various CAM software;

* Produce and export all kinds of machine tool, fixture and its accessories;

* Purchasing and sales of new and used lathe, milling or any other machine;

 

2. Energy Projects

 

JeffCNC has many years of China's steel and coal chemical technology background, has a wealth of energy engineering project planning, high stage design, investment estimates, budget and construction design experience and network resources, a strong scientific research and design institute technical support.


JeffCNC has a rich technical background and human resources, can cooperate in the following areas:

 

* Investment promotion,capital introduction and matches for China projects;

* EIA, feasibility study, preliminary design and other design cooperation;

* Any engineering projects budget and construction design cooperation;

* Special projects matchmaking, approval and organize services;

 

If you interest any projects on above list please email : [email protected], thanks!!!
 

 

-----------------------------------------------

 

(Chinese)

JeffCNC国际招商合作领域

一、机械工程项目

 

JeffCNC网站创办十多年,具有丰富的GibbsCAMMasterCAMEdgeCAMPowerMILL资料培训、技术支持与后处理开发经验,完美定制各种车床和3~5轴铣床后处理器......

 

客户来自世界各地,对后处理和技术服务非常满意。( 中国、加拿大、美国、丹麦、法国、西班牙、瑞典、意大利、德国... )

 

JeffCNC有现成网站平台和技术资源,可在以下领域开展合作:

 

* 机械CAD/CAM软件技术培训与咨询;

* 各种CAM软件的后处理器定制开发;

* 各种机床刀具、夹具及其配件生产外销;

* 新旧车床、铣床及其他机床的采购与销售;

 

二、能源工程项目

 

JeffCNC具有多年的中国钢铁和煤化工技术背景,有着丰富的能源工程项目前期规划、高阶段设计、投资估算、概预算以及施工图设计等经验与人脉资源,有强大的科研与设计院所技术支持。

 

JeffCNC有丰富的技术背景和人力资源,可在以下领域开展合作:

 

* 中外能源工程项目招商引资与牵线搭桥;

* 环评、可研、初步设计等高阶段设计合作;

* 工程项目的概预算以及施工图设计合作;

* 特许项目的筹办、审批与实施跟踪服务;

 

如果你对以上任何项目感兴趣,请电邮联系:  [email protected] 

 

中国—多伦多 投资合作项目

 

JeffCNC合作伙伴移居加国多年,在房地产投资和CNC开发方面取得丰硕的成果,具有丰富的经验和资源。

 

欢迎中外投资者在以下领域开展合作:

房地产投资

* 豪宅公寓买卖

* 旧房装修翻建

* 期房(楼花)投资

* 农场、酒庄、便利店

* 餐馆、学生公寓、度假村

CNC开发

* 数控加工厂转让

* 新旧数控机床交易

* 数控编程培训

* 后处理器开发

 

如果你对以上任何项目感兴趣,请电邮联系:  [email protected] 

 

中国—多伦多 投资案例

 

多伦多豪宅

 

房屋主要特色新秀豪宅区,开放式设计,设有室外游泳池,近著名私校,价格适宜,工薪层也能负担起

土地面积 72 x 146 尺近3个高尔夫球场豪宅

睡房4 + 1

卫生间 5

车库4,门前车道可停12辆车

地税1万加元每年

永久产权

要价:$240 加元

 

 

 

 

 

多伦多农场

 

该农场位于多伦多南部,紧邻大湖,其一边就是近200米长的湖岸线,在农场内就可以看到大湖的各样风光。       

该农场有以下几个特点:

1. 地理位置优越:靠近大湖,大湖的气候调节作用非常适合蓝莓的生长;靠近小镇,生活方便;

2. 该蓝莓农场中种植的蓝莓品质好,产量高,投资人可以在其他空地上种植新的蓝莓树,扩大种植面积,进一步增加效益。

3. 该农场中带有一栋别墅,舒适温馨,适合农场主一家人居住。

4. 蓝莓农场中带有非常大的现代化仓库,便于生产管理,设备存储。

5. 可以在成熟季节开发自我采摘,加之位于湖边,将农场经营为集自我采摘、休闲为一体的农场。

要价:$297 万加元

CCAGR,加拿大农场,加拿大移民,投资加拿大,加拿大花卉中心 
 
CCAGR,加拿大农场,加拿大移民,投资加拿大,加拿大花卉中心
CCAGR,加拿大农场,加拿大移民,投资加拿大,加拿大花卉中心 
 
CCAGR,加拿大农场,加拿大移民,投资加拿大,加拿大花卉中心 
 

如果你对以上任何项目感兴趣,请电邮联系:  [email protected] 

How to Cut a Key by CNC?

Posted by JEFFCNC on May 1, 2016 at 11:35 AM Comments comments (1)

How to Cut a Key by CNC?

1, Make picture for key:


.

2, Convert picture to DXF by software:

.

3, Load DXF and make model by GibbsCAM:


.

4, Creat NC program by EdgeCAM (or GibbsCAM):


.

5, Setup and machining will copy a key:




GibbsCAM POST

JeffCNC customized wonderful GibbsCAM 3~5Ax PostProcessor for FANUC series, Mitsubishi, Toshiba, Matsuura, SNK, OKK, Kitamura, and Hardinge, Yasnac control Mill, Lathe and millturn machine. Programmer satisfied 100% for the program, they don't need change anything.

In addition, JeffCNC developed special POST for Mach3/4, MAZAK, OKUMA and HAAS. We guarantee you have good POST and good service. Such as one client's email: "I have to show and discuss with my boss and explain what's you change. For me everything is very good. You are genius !!!!!!!!!!!!!!!!! "

OTHER POSTS

JeffCNC developed other POST for Other CAM with subroutines for multiple parts. POST can do whatever you want, save time and save money!

JeffCNC customized good POST such as Mach3, Mazak, Haas VF3, VF4, MiniMill and Lathe. JeffCNC guarantee 100% for good POST and free update service !!!!!!!!!!!!!!!!

Recent Videos

3105 views - 0 comments
3062 views - 0 comments
3072 views - 0 comments
3097 views - 0 comments

Customized POST

Calendar & Time

JEFFCNC