|Posted by JEFFCNC on January 3, 2020 at 4:40 PM|
Good MasterCAM Postprocessor
Recently, JEFF CNC developing good MasterCAM POST for customer, you can use different WCS offset and different sub program whatever you want.
1. If you don’t use Lock on First WCS, you will get G54, G55…
2. If you use Lock on First WCS, you will get G54 only.
3. And you can set Subs Progs [0=Off, Value=Num subs] as 1, then you can separate main program and sub program.
4. If you set Subs Progs [0=Off, Value=Num subs] more than 1, you will get more sub program with “/” block.
Use this special postprocessor, you can do anything whatever you want. You can “/” block set up first part and then run more part on same time.
JeffCNC alway do good job, want everybody happy, save time and save money.
Please see detail info about POST high value MachineSIM:
If you have any question or need any help about POST, ToolList, Machine Simulation and Machine Simulation macros, please contact me: [email protected]