|Posted by JEFFCNC on November 20, 2021 at 6:35 PM|
About GibbsCAM MachineSIM 3 Levels
JeffCNC can customize good MachineSIM depend on 3 price levels, please quote:
1, don't have machine model
2, have machine model
3, need macros for door movement and frame auto transparency
Normally JeffCNC customize MachineSIM without macros because save time and customer can save money.
Recently, JeffCNC made Haas UMC 500 BC Post and MachineSIM for customer, customer said "It looks pretty good so far", here is email:
When you use 8888 as program number you will see version info:
When you use MachineSIM without macros, you will see normall MachineSIM and need hiden machine fram for see inside:
MachineSIM very good for show 5 Axis simultaneous simulation:
Will exactly show 5 Axis simultaneous and so on…
But, if you use level 3 MachineSIM with macros will be high value and beautiful.
When you load new MachineSIM, you will see door open automatically as a movie:
When you start MachineSIM simulation, you will see door closed automatically and all machine fram become translucent :
Machine fram become translucent very good for show 5 Axis simultaneous simulation:
So, level 3 high value MachineSIM good for you see inside, you don't need change machine parts setup anything, you can see inside clearly.
Here is machine simulation videos, very interesting.
If you have any question or need any help about GibbsCAM pst/post, MDD, Machine Simulation and Machine Simulation macros, please contact me: [email protected]