JeffCNC Service Center

* POST CUSTOMIZE AND DATA SUPPLY *

CNC INFO CENTER

PostProcessor Customize Level

Posted by JEFFCNC on October 20, 2014 at 8:35 PM

Post Customize Level and Machine Axis Info:

Level Milling Turning Price
level1 3 Axis Mill POST 2 Axis Lathe POST @
level2 3+1 4Axis POST XZ+C Lathe POST @
level3 4Axis Rotary Simultaneous POST XYZ+C Lathe POST @
level4 3+2 5Axis POST / 4Axis TMS XYZ+C+B Lathe POST @
level5 5Axis Simultaneous MTM  @

.

JeffCNC customized so many good POST, I guarantee you will satisfied 100% for the POST.

 .

If you want customize new POST, please tell me what's CAM you use, Lathe or Mill machine Axis info, and then I can give you good price for the POST.  @: [email protected]

.


ABC Question And Answer

 

Q:

What is meant by "Rotary" and "Non Rotary" posts (level 2 and level 3)? Thanks.

A:

Rotary Milling with support for continuous rotary machining.

No Rotary Milling just 3+1 can rotate but not continuous rotary machining.

 

Q:

Can you give me test ,demo? i well to see first.

A:

JeffCNC only customize new POST, no any demo, because POST guaranteed and free update.

 

Q:

What do you need ? How long I will get new POST?

A:

After you pay I need your sample NC program, about a few days you will get new POST.

 

Q:

Not sure what you mean by "sample NC program". Please advise. Thanks.

A:

Sample program just use for what's format you want and good for your machine.
You can find any program already run in your machine or get it from machine supplier.

 

Q:

What about price and free update?

A: 

Price for pst only and free update for reasonable time (Can not more than half year).

.

 

After got new POST please test and update ASAP!!!

 

Q:

Can I speak with you?

A: 

JeffCNC customer from all over the world so only use email.

If you have any question please send me Email or Chat with me on my website.

.


Q:

How can I acces video?

A:

Only JeffCNC member can download videos and some special training materials.


Q:

How to become JeffCNC member ?

A:

Apply JeffCNC member please $10 Donation for membership first! Membership will approved on limit time and will get $50 discount when customize new POST. (limit time 1~2 years)

.

After membership approved please download videos and order POST ASAP!!!

.

...

About GibbsCAM POST and MachineSIM please see detail info:

About GibbsCAM POST and MachineSIM

...


Categories: CNC Programming, Other Info, CNC Tools

Post a Comment

Oops!

Oops, you forgot something.

Oops!

The words you entered did not match the given text. Please try again.

Already a member? Sign In

12 Comments

Reply Gabriel Constantinescu
12:08 PM on January 16, 2015 
I am interested in the price of a post processor OpenMind Hypermill 2010 for an order Num760 a CNC machine.
Reply JEFFCNC
6:09 PM on April 5, 2015 
Gabriel Constantinescu says...
I am interested in the price of a post processor OpenMind Hypermill 2010 for an order Num760 a CNC machine.

Please Email: [email protected]
Thanks, JEFF
Reply matti
4:39 AM on November 2, 2015 
how much do you want for level4 post for gibbs ihave a mori seiki nl2500 msx-850 servos
Best regards Matti
Reply JEFFCNC
7:13 PM on November 2, 2015 
matti says...
how much do you want for level4 post for gibbs ihave a mori seiki nl2500 msx-850 servos
Best regards Matti


Please check your email, thanks
Reply scott
9:59 AM on February 1, 2016 
we are running X5 mastercam with a Fanuc OI MD controller. The Generic post is close but the tool has a T1 with MO6 say on the same line we have to go in and drop the MO6 to the next line and on big programs its a pain how can I change it. Or do you have a post that works for this problem.
Reply JEFFCNC
5:25 PM on February 1, 2016 
scott says...
we are running X5 mastercam with a Fanuc OI MD controller. The Generic post is close but the tool has a T1 with MO6 say on the same line we have to go in and drop the MO6 to the next line and on big programs its a pain how can I change it. Or do you have a post that works for this problem.

Please give me email: [email protected]
Thanks, JEFF
Reply dany1982
2:50 AM on August 24, 2016 
hello im using OpenMind Hypermill Version 9.0 and i need postprocessor for Hurco wmx42t what is price
Reply GREIHAWK
7:53 AM on July 14, 2017 
Interested Level 1 and 2 post Edgecam 2016 R2, fanuc 0I-m VTEC vertical mill
Reply mark Pauline
5:51 PM on June 22, 2018 
Hi, I have a 2000 dmg dmu50v 5 axis machine. V4.00 software Millplus. I need a 5ax simultaneous post. I had ajems on cnczone try to write one but it does not work very well. Basically he never finished and now wont respond. I can send the post already made and give you some of the errors. i dont know all of them. Might be best to work from a known good post.
Reply JEFFCNC
9:28 PM on June 22, 2018 
mark Pauline says...
Hi, I have a 2000 dmg dmu50v 5 axis machine. V4.00 software Millplus. I need a 5ax simultaneous post. I had ajems on cnczone try to write one but it does not work very well. Basically he never finished and now wont respond. I can send the post already made and give you some of the errors. i dont know all of them. Might be best to work from a known good post.

Please send me email: [email protected]
Reply Gerry Flores
3:16 PM on December 10, 2020 
Need a price to modify a gibbs fadal post with 4th axis rotary. old rotary table was Fadal VH-65 with 90:1 ratio and the new rotary table is an Index designs with a 60:1 ratio. I will send you the working post for the 90:1 ratio machine so that you can make the necessary changes to the post file. Please let me know how much is the charge for this service. Thanks. Gerry
Reply JEFFCNC
4:28 PM on December 10, 2020 
Gerry Flores says...
Need a price to modify a gibbs fadal post with 4th axis rotary. old rotary table was Fadal VH-65 with 90:1 ratio and the new rotary table is an Index designs with a 60:1 ratio. I will send you the working post for the 90:1 ratio machine so that you can make the ne
cessary changes to the post file. Please let me know how much is the charge for this service. Thanks. Gerry

Please email: [email protected]
Thanks, JEFF

GibbsCAM POST

JeffCNC customized wonderful GibbsCAM 3~5Ax PostProcessor for FANUC series, Mitsubishi, Toshiba, Matsuura, SNK, OKK, Kitamura, and Hardinge, Yasnac control Mill, Lathe and millturn machine. Programmer satisfied 100% for the program, they don't need change anything.

In addition, JeffCNC developed special POST for Mach3/4, MAZAK, OKUMA and HAAS. We guarantee you have good POST and good service. Such as one client's email: "I have to show and discuss with my boss and explain what's you change. For me everything is very good. You are genius !!!!!!!!!!!!!!!!! "

OTHER POSTS

JeffCNC developed other POST for MasterCAM, EdgeCAM, SurfCAM, F360, HSM, Esprit, UG ... . POST can do whatever you want, save time and save money!

JeffCNC customized good POST such as Mach3, Mazak, Haas VF3, VF4, MiniMill and Lathe. And special POST with subroutines for multiple parts. JeffCNC guarantee 100% for good POST and free update service !!!!!!!!!!!!!!!!

Recent Videos

5169 views - 0 comments
5132 views - 0 comments
5139 views - 0 comments
5157 views - 0 comments

Customized POST

Calendar & Time

JEFFCNC