|Posted by JEFFCNC on March 3, 2019 at 2:25 PM|
JeffCNC Customized Good POST and MachineSim
Recently, JeffCNC customized good Esprit Post for customer, is 5 Axis POST and want tool list.
After POST you will see good tool list and don't need change anything:
Do you know what's your Esprit POST version? When you use 8888 as program number you will see...
Now you can see your Esprit POST version from JeffCNC, same as all other CAM:
You can see more Post and MachineSIM, such as GibbsCAM Post and MachineSIM for customer.
Here is email and customer said "It looks pretty good so far":
When you use 8888 as program number you will see version info:
About GibbsCAM MachineSIM please see detail info:
JEFFCNC customized good GibbsCAM POST, MDD for customer, machine rotary special but JeffCNC can do whatever customer want, please see email:
And JEFFCNC customized good MachineSim, is good for programming. Here is info about how to use GibbsCAM MachineSim:
1.Use GibbsCAM Plug_Ins > PathFinder find MachineSim folder.
2. Copy MachineSim package to MachineSim folder.
3. Use and load your MachinmeSim.
4. Here is info for old version:
5. Here is sample for load MachineSim:
Use MachinmeSim you can find any problem and improve programming.
JeffCNC alway do good POST and MachineSim, is good for you save time and save money.
Please see detail info about POST high value MachineSIM:
If you have any question or need any help about POST, ToolList, Machine Simulation and Machine Simulation macros, please contact me: [email protected]
And JeffCNC customize special POST for customer who use very old mori seiki machine with yasnac control, X axis reversed direction (X-,Z+) and G2 becomes G3, G42 becomes G41).
JeffCNC can do exactly whatever customer want, please see detail info:
And JeffCNC customize more special POST for customer, after quote and finish good POST less than 1 week.
Here is email from customer today and customer said:
"Post looking pretty good thank you. Will keep on testing."
JeffCNC customize new POST over 10 years never have problem. I just want do good POST for customer but I hope have good cooperation and don't want waste your money and my time.
You can see I have so many good customers and good cooperation and customized
JeffCNC always customized good POST for customer:
Such as good POST for Hass and Okuma, all customer like it.
Here is one email from customer:
And some special good POST for customer:
Such as 5 Axis Matsuura MAM72-100H horizontal post and Mdd with special gun drill macros. Post uses G68.2 and shower coolant options with G131R0 thru G131R9 for countering control.
Here is email from customer:
And some POST for special control such as Siemens 840D:
POST for Quaser MF500U 5axes with Siemens 840D control.
Here is email from customer:
More comments by email:
More Special POST For MasterCAM:
One POST for trumpf laser with semins 840 controller. Main problem is
the TC_LASER_ON cycle is called up in the NC program with the following cycle parameters:
TC_LASER_ON (Laser method, "Laser technology table", Piercing type, Cutting type)
JeffCNC design Laser technology table use Tool name;
If you use default Tool # and same number for Len. Offset and Dia. Offset, Laser method will use "9", Piercing type use "10" and Cutting type use "110" as default, or you can change whatever you want:
JeffCNC always do the best for everybody that's why customer happy for this POST:
Another POST for Siemens MILL, JeffCNC customize good ToolLIST :
MasterCAM ToolLIST can align:
You can set Tool name length 20 or any number, if your Tool name longer then this number, will automatically put "~" keep same length: