|Posted by JEFFCNC on May 7, 2022 at 12:45 PM|
Recently, JeffCNC customized good UG NX and Esprit Post for customer, POST can do whatever you want, save time and save money!
Here is UG NX Post Builder:
It is DMU50 5Axis POST, for DMU50 and TNC530:
After POST you will see good NC program and don't need change anything:
If you use 8888 as program number you will see your version:
And recently, JeffCNC customized good Esprit Post for customer, is 5 Axis POST and want tool list.
After POST you will see good tool list and don't need change anything:
Do you know what's your Esprit POST version? When you use 8888 as program number you will see...
Now you can see your Esprit POST version from JeffCNC, same as all other CAM:
JeffCNC customized Post so many years for Gibbs, MasterCAM, EdgeCAM, SurfCAM, Fusion360, HSM, Esprit, UG ...
JeffCNC can customize good POST whatever you want, if you want customize new POST, please contact me: [email protected].