Forum Home > GibbsCAM Programming > Haas vertical 3 axis post | ||
---|---|---|
Member Posts: 2 |
Contacted Jeff about formatting a custom post for us. In less than 2 weeks with 3 small edits Jeff finished what I feel is a perfect post. Posted several complex programs with no edits required. Time savings over the course of the year will be in the 100”s of hours. Well worth the investment.
| |
-- Regards, Paul Verhoest G.P.R. Company, Inc. 22 Daniel Road East Fairfield, NJ 07004-2529
| ||
Moderator Posts: 166 |
I got good 5Axis POST from JeffCNC before. First POST looks very good, after a few times free update then don't need change anything... Jeff did good job.
| |
| ||
Site Owner Posts: 241 |
| |
| ||
Site Owner Posts: 241 |
| |
| ||
Site Owner Posts: 241 |
| |
| ||
Site Owner Posts: 241 |
| |
| ||
Site Owner Posts: 241 |
| |
| ||
Site Owner Posts: 241 |
| |
| ||
Site Owner Posts: 241 |
| |
| ||
Site Owner Posts: 241 |
| |
| ||
Site Owner Posts: 241 |
Thanks for so many guys select JeffCNC and from all over the world! JeffCNC can do whatever you want, here is one email recently from USA: ________________________ WOW Jeff !
Bamm that is just what I wanted.
G-code looks right I am at home and will run more tests but over all looks
Great.
thanks
________________________ If you want customize new POST, please tell me what's CAM you use and what's machine Axis level info: http://jeffcnc.webs.com/apps/blog/show/42753145-postprocessor-customize-level Thanks, JEFF
| |
| ||
Site Owner Posts: 241 |
Recently, JeffCNC customized good Machine Simulation for customer, JeffCNC can do whatever you want. Here is email from one customer: ________________________ Jeff. Thanks! All of the Mastercam and Surfcam guys at my shop are now envious ! Bamm ! you made my Haas dual trunnion sim, Matsuura 72-100 H sim , and now UMC 750 simultaneous sim. thanks! ________________________
Here is more info about GibbsCAM POST and MachineSIM https://jeffcnc.webs.com/apps/blog/categories/show/845457-gibbscam | |
| ||