JeffCNC Service Center

* POST CUSTOMIZE AND DATA SUPPLY *

CNC Forum

Post Reply
Forum Home > JeffCNC POST Reference > Good MasterCAM Post for Customer

JEFFCNC
Site Owner
Posts: 241

JeffCNC customize MasterCAM POST over 10 years, such as:

Special One POST for trumpf laser with semins 840 controller.

Main problem is the TC_LASER_ON cycle is called up in the NC program with the following cycle parameters:


TC_LASER_ON (Laser method, "Laser technology table", Piercing type, Cutting type)    

 


JeffCNC design Laser technology table use Tool name;

If you use default Tool # and same number for Len. Offset and Dia. Offset, Laser method will use "9", Piercing type use "10" and Cutting type use "110" as default, or you can change whatever you want:
 

 

JeffCNC always do the best for everybody that's why customer happy for this POST:

 

Another POST for Siemens MILL, JeffCNC customize good ToolLIST :

MasterCAM ToolLIST can align:

 

You can set Tool name length 20 or any number, if your Tool name longer then this number, will automatically put "~" keep same length:

.

JeffCNC can customize good POST whatever you want, if you want customize new POST, please contact me: [email protected].

April 29, 2022 at 6:30 PM Flag Quote & Reply

You must login to post.

GibbsCAM POST

JeffCNC customized wonderful GibbsCAM 3~5Ax PostProcessor for FANUC series, Mitsubishi, Toshiba, Matsuura, SNK, OKK, Kitamura, and Hardinge, Yasnac control Mill, Lathe and millturn machine. Programmer satisfied 100% for the program, they don't need change anything.

In addition, JeffCNC developed special POST for Mach3/4, MAZAK, OKUMA and HAAS. We guarantee you have good POST and good service. Such as one client's email: "I have to show and discuss with my boss and explain what's you change. For me everything is very good. You are genius !!!!!!!!!!!!!!!!! "

OTHER POSTS

JeffCNC developed other POST for MasterCAM, EdgeCAM, SurfCAM, F360, HSM, Esprit, UG ... . POST can do whatever you want, save time and save money!

JeffCNC customized good POST such as Mach3, Mazak, Haas VF3, VF4, MiniMill and Lathe. And special POST with subroutines for multiple parts. JeffCNC guarantee 100% for good POST and free update service !!!!!!!!!!!!!!!!

Recent Videos

5969 views - 0 comments
5923 views - 0 comments
5932 views - 0 comments
5948 views - 0 comments

Customized POST

Calendar & Time

JEFFCNC